1.Daily maintenance: Use a clean 90% dry mop to clean the pvc furniture board, and clean the parts with serious pollution;

2.monthly maintenance: waxing treatment of the damaged surface of the partial foundation. In particular, the homogeneous PVC board is generally waxed and maintained once a month;

3.Pollution treatment: the stained ink, food, greasy, etc. on the PVC board should be wiped off, and then use a diluted detergent to scrub the traces. When the remaining black leather shoe prints are difficult to remove, you can use a veil soaked in loose perfume to scrub. Pour the pine perfume on the PVC board to clean it, and after scrubbing, it must be waxed for maintenance;

Note: You cannot use cleaning balls or knives to clean the PVC board. For dirt that cannot be cleaned by conventional methods, consult the relevant person. Do not use acetone, toluene, and other chemicals indiscriminately;

4.Chemical protection: avoid a large amount of water staying on the surface of the PVC board for a long time. If the water soaks the floor for a long time, it may penetrate under the PVC board to melt the PVC board and lose its adhesion, and it may also cause the protective wax on the surface of the PVC board. Delamination causes the pollution of the PVC board, and the sewage may penetrate into the inside of the PVC board and cause the PVC board to change color;

5.Sun protection: Avoid direct exposure to strong light, and make the PVC board irradiate ultraviolet rays to prevent the PVC board from discoloration and fading.