The pvc furniture board is a common type of board in our lives. I believe everyone has seen the application scene of PVC board. We have introduced a lot of comparisons between PVC panels and other types of panels before. Recently, some customers have inquired about the difference between PVC panels and plastic steel panels. Let's take a look at the differences between the two today!

The main differences between PVC board and plastic steel plate are: 1. Different properties. 1. PVC board: Vinyl chloride monomer is polymerized under the action of peroxides, azo compounds and other initiators, or under the action of light and heat under the mechanism of free radical polymerization. 2. Plastic steel plate: Amorphous thermoplastic resin made of vinyl chloride monomer through polymerization reaction, composed of certain additives (such as stabilizers, lubricants, fillers, etc.). Two, the application is different. 1. PVC board application: Rigid polyvinyl chloride has good tensile, bending, compression and impact resistance, and can be used as a structural material alone. The flexibility, elongation at break, and cold resistance of soft PVC will increase, but the brittleness, hardness, and tensile strength will decrease. 2. Plastic steel plate application: usually the diameter is 40-100mm, the inner wall is smooth and has low resistance, no scaling, non-toxic, non-polluting, and corrosion-resistant. The use temperature is not more than 40 degrees, so it is a cold water pipe. Good anti-aging performance, flame retardant, and flexible connection installation with rubber ring. The above is our sharing today about the difference between PVC board and plastic steel board. Hope it can help everyone!